Harlequinpaints

Heat Resistance Coating

Special Primer Coating

Enamel Coating- Harlemel

Epoxy Coating-Harlepoxy

Polyurathane Coating- Harlecoat / Harlethane

Acrylic Coating- Harlecryl

Melamine Coating-Harlemine

Enamel Roller Coating-Harlemel

Vaccum Metalising Enamel Coating-Harlemel

Description	This is chlorinated rubber based coating fortified with micaceous iron oxide pigment. It has good resistance to salt water
Volume Solids	45% Â± 2
DFT	50 Microns
Mixing Ratio	N/A
Pot Life	N/A
Spreading Rate	9 Sq.m/ltr
Surface Dry	1-2 Hrs at 30Â°C and 65% relative humidity
Hard Dry	5-6 Hrs at 30Â°C and 65% relative humidity
Subsequent Coat	As per substrate condition recommended coating system
RECOATING TIME - MIN	7 Hrs
RECOATING TIME - MAX	None
Fully Cured	48 Hrs
Shelf Life	1 Year
Surface Preparation	Properly primed surface, clean from oil, grease
Applicable Industry	Maintanance
Application Method	Conventional Air Spray/ Brush/ Airless Spray
Recommended Thinner	Harlechlor Thinner
Sugested Use	Recommended to use as intermediate in the chlorinated rubber coating system.